|
HOME
PRODUCTS
SERVICES
SPECIALS
RESINATOR Q.T.
KITS
ABOUT
US
CONTACT US
F.A.Q.
VIEW
CART
ORDERING
| |
| |
|
| Precision Carbide Drill ...Part
#200 |
 |
$69.95 $55.96
|
| Designed exclusively for glass repair. Drilling reduces the time required to fill combination and star breaks. 8,500 RPM’s. By using the momentary switch the motor never achieves full RPM’s. The proper use of the momentary switch avoids heat build-up on the bit which in turn increases bit life. Keyless chuck for fast bit replacement. Includes collet (#205). Lightweight 7.8 oz. (221 g). Palm-sized to enable the user to achieve a steady position on the glass (reduces bit breakage). 12’ (3.6 m) two-wire cord to reach high places. Has male cigarette lighter
plug. |
| Buffing Drill...Part#
230 |
 |
$74.95
|
| Same as #200 with exception of the
collet, mandrel, and buffing wheel. Designed to polish repaired pits to a glass-like luster. Completely set up with one buffing wheel (#245), mandrel (#240), and collet (#235). Note: It is recommended that each technician have both the BUFFING DRILL and the CARBIDE DRILL because this will save time switching collets, bits, and mandrels. Also, by having both you have a back-up
drill. |
| Quantity |
Price |
Example |
| 1-24 |
$1.79 ea $1.44 ea. |
|
| 25-49 |
$1.74 ea $1.39 ea. |
25=$43.50 $34.75 |
| 50-99 |
$1.67 ea $1.34 ea. |
50=$83.50 $67.00 |
| 100-249 |
$1.49 ea $1.19 ea. |
100=$149.00 $119.00 |
| Magnetic Bull’s-Eye Maker...Part#
640 |
 |
$14.95
|
| Bull’s-eye tip, mounted in a handy pen-like holder with a magnet on one end and the spring steel tip on the other. To use, simply place tip in .035 drilled hole (#210) and tap with an object like a probe. Also includes a carbide
tip. |
| Bull’s-
Eye Maker...Part# 633 |
 |
$
9.95
|
| Designed to create a miniature bulls-eye in a drill hole. Prolongs bit life and opens crevices for easier resin flow. Rod 1/8” x 3-5/8” (3.175 x 92.08 mm) with a .031 high strength spring steel tip. Spring steel to prevent breaking in the drill hole. To use, simply place in a .035 drilled hole (#210) and tap with an object like a
probe. |
| Collets...
Fits drill part #'s 200, #230 |
|
#205
1/16” (1.59 mm) For bits with .060 shaft |
$4.45
|
 |
#235 3/32” (2.38 mm) For buffing mandrel (#240) |
$4.45
|
| |
| Mandrel... |
|
#240
Used to secure buffing wheels. Used with collet (#235) |
$3.49
|
| |
| Buffing Wheel |
 |
#245
5/8” diam. 1/8” thick (15.88 x 3.175 mm) |
$
.89
|
| Durable felt buffing wheel. Normally used to buff the repaired pits to a glass-like
luster. |
Email:
sales@liquidresins.com
| |
